Menzel Vision And Robotics Private Limited

The XS-1.7-320 is an uncooled NIR camera that employs a 320 x 256 InGaAs FPA. The XS camera interfaces to a PC via USB 2.0. Additionally, the camera comes with either an analog out (CCIR or RS-170) or an external trigger input.

Lynx-1024-GigE
The Lynx-1024-GigE offers in many ways an affordable solution. The small form factor, high resolution and smallest pixel pitch of 12.5 μm allows more precision and optimization of compact systems with lower cost lenses. The Lynx-1024-GigE is also a flexible solution with an industry-standard GigE Vision and Power over Ethernet interface. Furthermore you can change integration times from 1 μs to 1 s. You will reach optimal image quality choosing from various configurations in High Sensitivity mode (HS) or High Dynamic Range Mode (HDR) and multiple gain settings.

Lynx-2048-CL
The Lynx-2048-CL offers in many ways an affordable solution. The small form factor and smallest pixel pitch of 12.5 μm allows more precision and optimization of compact systems with lower cost lenses. The high line resolution substitutes for costly multiple-camera solutions. The Lynx-2048-CL is perfectly suited for high speed scanning with high line rates up to 10 kHz. In addition the camera comes with an industry standard Camera Link interface for data transfer at full line rate. You will reach optimal image with low dark current and excellent signal to noise ratios. Furthermore you can operate multiple integration times.

Lynx-2048-GigE
The Lynx-2048-GigE offers in many ways an affordable solution. The small form factor and smallest pixel pitch of 12.5 μm allows more precision and optimization of compact systems with lower cost lenses. The high line resolution substitutes for costly multiple-camera solutions. The Lynx-2048-GigE is also a flexible solution with an industry-standard GigE Vision and Power over Ethernet interface. You can also synchronize external events by the trigger input. You will reach optimal image quality choosing from various configurations in High Sensitivity mode (HS) or High Dynamic Range Mode (HDR) and multiple gain settings.

Lynx-512-CL
The Lynx-512-CL offers in many ways an affordable solution. The small form factor and small pixel pitch allow you to optimize compact systems with lower cost lenses. The Lynx-512-CL comes without cooler and therefore lower power consumption. The Lynx-512-CL is perfectly suited for high-speed scanning with high line rates up to 40 kHz. In addition, the camera comes with an industry standard Camera Link interface for data transfer at full line rate.

Lynx-512-GigE
The Lynx-512-GigE offers in many ways an affordable solution. The small form factor and small pixel pitch allow you to optimize compact systems with lower cost lenses. In addition, the camera comes with an industry standard GigE Vision and Power over Ethernet interface for much easier integration. The Lynx-512-GigE comes without cooler and therefore lower power consumption. The Lynx-512-GigE is perfectly suited for high-speed scanning with high line rates up to 40 kHz. You will reach optimal image quality with low dark current and excellent signal to noise ratios.

The Xeva-Lin-2.5 - Mid Wave Infrared Camera perfectly suited for a wide variety of spectroscopy and imaging applications. The camera can be fitted with a wide variety of linear detector arrays. Check our Detectors page for more info on the arrays.

• Ingas detector
• Peltier cooler optional
• 128, 256, or 512 pixels
• Cut-off wavelength up to 2.5 µm
• Low dark current
• Line rate up to 9 kHz
• 12-bit or 16-bit AD conversion
• USB 2.0 or CameraLink interface
• External trigger input
• Four gain modes

The Xeva-2.5-320 is a SWIR camera that employs a 320x256 HgCdTe FPA. The Xeva camera head interfaces to a PC via Camera Link or USB 2.0.

• HgCdTe detector
• 0.85 to 2.5 µm sensitivity
• 320 x 256 pixels
• Framerate 60Hz or 100Hz
• USB 2.0 or CameraLink data interface
• Four-stage Peltier cooler
• External trigger input