Menzel Vision And Robotics Private Limited

We offer an exclusive range of fujinon vision lenses, which are specifically designed for the line-scan and large area sensor market. These vision lenses meet the demands for high center to edge resolution and are designed to match the performance abilities of the high end megapixel type cameras. Innovative designed, these lenses are ideal for vision system applications and permit cameras to inspect large areas without the great distance required by a typical lens. These lenses have low distortion that allows cameras to determine dimensional measurements without the need for software calibration on vision systems.

• High resolution Macro Zoom Lens
• Low Magnification Zoom Lens with Co-axial Illumination
• 8.0x Compact Macro Zoom Lens
• 6.0x Zoom Lens

We provide a unique range of Kowa industrial fa lenses, which are widely used in machine vision systems. These lenses have excellent resolutions with varied focus length and can be used in a variety of applications. Our range of Kowa industrial Fa lenses are available with close lenses for close distance applications.

Special features of our lenses are:

• Wide angle Low distortion
• Ultra-high resolution
• Low color aberration
• Excellent corner brightness
• Ideal for mega pixel applications

PCCD Series are pericentric lenses exclusively developed and produced to enable the 360° side view imaging of small objects.
Their innovative optical design, based on a catadioptric system, makes it possible to image small objects, with diameters as small as 7 mm.
The sides of the object are imaged through the catadioptric system, while the top surface is directly imaged onto the center of the detector.
The compactness and high resolution performances of these lenses make them the perfect choice for the inspection of components like pharmaceutical containers, plastic caps, pre-forms, bottle necks, screws and other threaded objects.

Kowa LF-Series includes 3 different models with focal length of 28mm, 35mm and 50mm. All lenses are optimized for extra high resolution and contrast from the center to the edge with very little distortion. Due to a minimum focusing distance of less than 30cm all 3 models are suitable for close-up applications. All lenses are especially designed for industrial applications with locking screws for the manual focus and iris setting.

• LM28LF

  Focal length 28.0 mm, Sensor: 43.3mm, F-mount

• LM28LF-48

  Focal length 28.0 mm, Sensor: 43.3mm, TFL-II mount

• LM35LF

  Focal length 35.0 mm, Sensor: 43.3mm, F-mount

• LM35LF-48

  Focal length 35.0 mm, Sensor: 43.3mm, TFL-II mount

• LM50-IR-F

  Focal length 50.0 mm, Sensor: 43.3mm, F-mount

• LM50-IR-P

  Focal length 50.0 mm, Sensor: 43.3mm, P-mount

• LM50LF

  Focal length 50.0 mm, Sensor: 43.3mm, F-mount

• LM50LF-48

  Focal length 50.0 mm, Sensor: 43.3mm, TFL-II mount

• LM65-IR-F

  Focal length 65.0 mm, Sensor: 43,3mm, F-mount

• LM65-IR-P

  Focal length 65.0 mm, Sensor: 43,3mm, P-mount

• TP556-TX07

  Focal length 350.0 mm, Sensor: 43.3mm, F-mount

• TP556-TX10

  Focal length 500.0 mm, Sensor: 43.3mm, F-mount

• TP556-TX17

  Focal length 850.0 mm, Sensor: 43.3mm, F-mount

Introducing the new lineup of megapixel lenses designed for 1 inch megapixel cameras. These lenses have low distortion, excellent light transmission and are also highly recommended for use with smaller format size cameras. The series of 8 different models starts with focal length 6mm up to 75mm and is perfect economic solution for 1” sensors with pixel size down to 5µm.

• LM6HC

  Focal length 6.0 mm, Sensor: 1″, C-mount

• LM8HC

  Focal length 8.0 mm, Sensor: 1″, C-mount

• LM12HC

  Focal length 12.5 mm, Sensor: 1″, C-mount

• LM16HC

  Focal length 16.0 mm, Sensor: 1″, C-mount

• LM25HC

  Focal length 25.0 mm, Sensor: 1″, C-mount

• LM35HC

  Focal length 35.0 mm, Sensor: 1″, C-mount

• LM50HC

  Focal length 50.0 mm, Sensor: 1″, C-mount

• LM75HC

  Focal length 75.0 mm, Sensor: 1″, C-mount

Kowa’s new HC-V series is made for use in high vibration and high shock environments. With a design based on Kowa’s standard 1 inch HC lenses this ruggedized megapixel lens series is ideal for applications that require increased durability and high optical performance. All internal glass elements of this series are glued. A two way reversible nut is utilized to tightly lock the focus adjustment ring in place. Interchangeable iris plates which can be glued are used to select the F-stop.

• Flyer

  HC-V Series

• LM8HC-V

  Focal length 8.0 mm, Sensor: 1″, C-mount

• LM12HC-V

  Focal length 12.5 mm, Sensor: 1″, C-mount

• LM16HC-V

  Focal length 16.0 mm, Sensor: 1″, C-mount

• LM25HC-V

  Focal length 25.0 mm, Sensor: 1″, C-mount

• LM35HC-V

  Focal length 35.0 mm, Sensor: 1″, C-mount

• LM50HC-V

  Focal length 50.0 mm, Sensor: 1″, C-mount

The HC-SW series is specially designed for near-infrared and short wavelength infrared (SWIR) applications. Incorporating Kowa´s special coating technology, the 1 inch format HC-SW series will maintain high transmission from 800nm to 2.000nm with sharp pictures from the center to the corner.

• LM8HC-SW

  Focal length 8.0 mm, Sensor: 1″, C-mount

• LM12HC-SW

  Focal length 12.5 mm, Sensor: 1″, C-mount

• LM16HC-SW

  Focal length 16.0 mm, Sensor: 1″, C-mount

• LM25HC-SW

  Focal length 25.0 mm, Sensor: 1″, C-mount

• LM35HC-SW

  Focal length 35.0 mm, Sensor: 1″, C-mount

• LM50HC-SW

  Focal length 50.0 mm, Sensor: 1″, C-mount

• High resolution
• Compact design
• Durability

This lens series is an economical standard resolution lens series for 1/2 inch cameras. All models are designed for harsh environment and thus equipped with locking screws for iris and focus.

• LM4NCL

  Focal length 3.5 mm, Sensor: 1/2″, C-mount

• LM5NCL

  Focal length 4.5 mm, Sensor: 1/2″, C-mount

• LM6NCL

  Focal length 6.0 mm, Sensor: 1/2″, C-mount

• LM12NCL

  Focal length 12.0 mm, Sensor: 1/2″, C-mount

• 2/3" 3 Megapixel Series
• 1" 1.5 Megapixel Series
• 2/3" 1.5 Megapixel Series
• 1/3" High Resolution for 3CCD
• 1/2" 1.5 Megapixel Series

PERICENTRIC LENSES are an exclusive product developed to enable 3D peripheral vision of objects without the aid of mirrors. By means of this unique optical design, just one camera shot is enough to capture the top and side views of an object. The name “pericentric” is because of the specific path of the light rays: the aperture pupil is seen from object space as if it was moving around the peripheral zone of the front optical group.

A lens for line scan camera is required high level of optical design and production process for LCD, lead frame, or film inspection. We offer several types of line scan lenses for LCD, film, or printing inspection.
We have a wide range of line scan lenses for various applications.

• Super High resolution of 3.5x Lens for 8k/12k Line Scan Camera

• Super High resolution Lens for 8k/12k Line Scan Camera
• Line Scan Lens for Large Image Circle, @90mm
• Fixed magnification Lens for F Mount
• High resolution and wide angle lens for Area & Line Scan Camera
• Area scan lens for TFL-II Mount
• Macro lens for Area & Line Scan Camera
• Area & Line scan lens for wide field of view
• High resolution wide angle lens for Large Image Circle @62mm
• Line Scan Lens for large Aperture

The JC5M2-Series is the perfect lens series for high-end applications with sensors of 3,5µm pixel size. The series is placed between Kowa JC1MS and JC10M series with 4 different models with focal length of 12mm, 16mm, 25mm and 35mm. All lenses are especially designed for industrial applications with locking screws for the manual focus and iris setting and suitable for use in harsh industrial environment.

• LM12JC5M2

  Focal length 12.5 mm, Sensor: 2/3″, C-mount

• LM16JC5M2

  Focal length 16.0 mm, Sensor: 2/3″, C-mount

• LM25JC5M2

  Focal length 25.0 mm, Sensor: 2/3″, C-mount

• LM35JC5M2

  Focal length 35.0 mm, Sensor: 2/3″, C-mount

This series of megapixel lenses offers very high resolution (120lp/mm) and utilizes the floating mechanism system. Megapixel lens will pave the way for new possibilities in price oriented machine vision systems. The JC1MS Series is an upgrade of the previous JCM series with detailed iris and focus scale on the lens.

• LM5JC1M

  Focal length 5.0 mm, Sensor: 2/3″, C-mount

• LM8JC1MS

  Focal length 8.0 mm, Sensor: 2/3″, C-mount

• LM12JC1MS

  Focal length 12.0 mm, Sensor: 2/3″, C-mount

• LM16JC1MS

  Focal length 16.0 mm, Sensor: 2/3″, C-mount

• LM25JC1MS

  Focal length 25.0 mm, Sensor: 2/3″, C-mount

• LM35JC1MS

  Focal length 35.0 mm, Sensor: 2/3″, C-mount

• LM50JC1MS

  Focal length 50.0 mm, Sensor: 2/3″, C-mount

Kowa has added a new 4/3 inch telecentric macro zoom to its product line. The LM1119TC is telecentric from 0.5× – 1.0× magnification and able to resolve up to 21 megapixel.

Besides that, Kowa introduces a new 2/3 inch telecentric 5 megapixel plus series. The series includes three lenses with adjustable magnification. The ranges of magnification are 1.725× – 2.2× (LM1121TC), 1.15× – 1.47× (LM1122TC) and 0.69× – 0.88× (LM1123TC).

All new telecentric lenses have very low distortion. They produce high contrast and resolution in both center and corners.
In a telecentric optical system, there is no change in magnification when focusing, and magnification is constant over working distances. Thus movement of an object does not change magnification. Therefore, it is suitable for measuring objects with high accuracy.

• LM1119TC

  Magnification 0.5× – 1.0×, Sensor: 4/3″, C-mount

• LM1121TC

  Magnification 1.72× – 2.2×, Sensor: 2/3″, C-mount

• LM1122TC

  Magnification 1.15× – 1.47×, Sensor: 2/3″, C-mount

• LM1123TC

  Magnification 0.69× – 0.88×, Sensor: 2/3″, C-mount

• LM50TC

  Magnification 0.3× – 1.0×, Focal length 50.0 mm, Sensor: 2/3″, C-mount

Kowa is offering a 4/3” C-mount lenses series for sensor size with up to 23mm image circle. Resolution of this new XC-series is 160lp/mm in the center and thus matches perfectly for example with the sensor KAI-08050 from Truesense Imaging or CMOSIS MV4000. The new XC-series includes 5 different models with focal length between 12mm up to 50mm. Just as other machine vision lenses from Kowa this new series is constructed to withstand high requirements on vibration, shock and temperature. All models are equipped with a special broadband coating for extraordinary transmission at NIR wave length.

• LM8XC

  Focal length 8.5 mm, Sensor: 4/3″, C-mount

• LM12XC

  Focal length 12.0 mm, Sensor: 4/3″, C-mount

• LM16XC

  Focal length 16.0 mm, Sensor: 4/3″, C-mount

• LM25XC

  Focal length 25.0 mm, Sensor: 4/3″, C-mount

• LM35XC

  Focal length 35.0 mm, Sensor: 4/3″, C-mount

• LM50XC

  Focal length 50.0 mm, Sensor: 4/3″, C-mount

These lenses are designed for use with 3CCD color prism cameras and are useful in obtaining accurate color information. With a standard F-mount, the CLS lenses offer ultra-high resolution, low color aberration, and excellent corner brightness. The line-up of NC3 megapixel lens series is especially designed for 1/2 inch 3CCD megapixel C-mount cameras to reproduce accurate color information with low color aberration and low distortion.

• LM4NC3

  Focal length 4.0 mm, Sensor: 1/2″, C-mount

• LM6NC3

  Focal length 6.0 mm, Sensor: 1/2″, C-mount

• LMZ856-HD3

  Focal length 8.0 - 56.0 mm, Sensor: 1/2″, C-mount

• LM12NC3

  Focal length 12.0 mm, Sensor: 1/2″, C-mount

• LM25NC3

  Focal length 25.0 mm, Sensor: 1/2″, C-mount

• LM28CLS

  Focal length 28.0 mm, Sensor: 30mm, F-mount

• LM35CLS

  Focal length 35.0 mm, Sensor: 30mm, F-mount

• LM50CLS

  Focal length 50.0 mm, Sensor: 30mm, F-mount

• LM50NC3

  Focal length 50.0 mm, Sensor: 1/2″, C-mount

• LM5JC10M

  Focal length 5.0 mm, Sensor: 2/3″, C-mount

• LM8JC10M

  Focal length 8.5 mm, Sensor: 2/3″, C-mount

• LM12JC10M

  Focal length 12.0 mm, Sensor: 2/3″, C-mount

• LM16JC10M

  Focal length 16.0 mm, Sensor: 2/3″, C-mount

• LM25JC10M

  Focal length 25.0 mm, Sensor: 2/3″, C-mount

• LM35JC10M

  Focal length 35.0 mm, Sensor: 2/3″, C-mount

• LM50JC10M

  Focal length 50.0 mm, Sensor: 2/3″, C-mount

The SC series is designed for 1 inch 6 megapixel cameras and can be used for sensors with a pixel size down to 3,5 µm. It matches well with sensors such as the Sony ICX814 and ICX694 or the CMOSIS CMV4000. The SC series perfectly fills the gap between Kowa’s HC-Series and XC-Series.

• LM12SC

  Focal length 12.0 mm, Sensor: 1″, c-mount

• LM16SC

  Focal length 16.0 mm, Sensor: 1″, c-mount

• LM25SC

  Focal length 25.0 mm, Sensor: 1″, c-mount

• LM35SC

  Focal length 35.0 mm, Sensor: 1″, c-mount

• LM50SC

  Focal length 50.0 mm, Sensor: 1″, c-mount

These lenses have supported many machine vision systems in recent years. The lenses have excellent resolution, and with focal lengths from 6mm to 100 mm, they can be used in a variety of applications.

• LM6JC

  Focal length 6.0 mm, Sensor: 2/3″, C-mount

• LM8JC

  Focal length 8.0 mm, Sensor: 2/3″, C-mount

• LM12JC

  Focal length 12.0 mm, Sensor: 2/3″, C-mount

• LM16JC

  Focal length 16.0 mm, Sensor: 2/3″, C-mount

• LM25JC

  Focal length 25.0 mm, Sensor: 2/3″, C-mount

• LM35JC

  Focal length 35.0 mm, Sensor: 2/3″, C-mount

• LM50JC

  Focal length 50.0 mm, Sensor: 2/3″, C-mount

• LM75JC

  Focal length 75.0 mm, Sensor: 2/3″, C-mount

• LM100JC

  Focal length 100.0 mm, Sensor: 2/3″, C-mount

Kowa´s JCM-V series is made for use in high vibration and high shock environments. With a design based on Kowa´s standard 2/3 inch JC1MS lenses this ruggedized megapixel lens series is ideal for applications that require increased durability and high optical performance. All internal glass elements of this series are glued. A two way reversible nut is utilized to tightly lock the focus adjustment ring in place. Interchangeable iris plates which can be glued are used to select the F-stop.

• LM8JCM-V

  Focal length 8.0 mm, Sensor: 2/3″, C-mount

• LM12JCM-V

  Focal length 12.0 mm, Sensor: 2/3″, C-mount

• LM16JCM-V

  Focal length 16.0 mm, Sensor: 2/3″, C-mount

• LM25JCM-V

  Focal length 25.0 mm, Sensor: 2/3″, C-mount

• LM35JCM-V

  Focal length 35.0 mm, Sensor: 2/3″, C-mount

• LM50JCM-V

  Focal length 50.0 mm, Sensor: 2/3″, C-mount

Meet the new benchmark for precise iris control. Kowa´s advanced technology replaces the use of conventional galvanometers with stepper motors so that users are able to move or stop the iris position at the most optimal level. A more precise iris control means that common problems such as hunting, diffraction, and shallow depth of field can be eliminated or drastically reduced to produce a sharper image. For Kowa, it´s not about meeting standards. It´s about setting new levels that leave the competition behind. The variofocal and fixed focal P-iris lenses are the first choice for high-end ITS applications.

• LMVZ3109M-IR

  Focal length 3.1 - 9.0 mm, Sensor: 1/2.7″, CS-mount

• LMVZ3510M-IR

  Focal length 3.5 - 10.0 mm, Sensor: 1/2″, CS-mount

• LMVZ9020M-IR

  Focal length 9.0 - 20.0 mm, Sensor: 1/2″, CS-mount

• LM16JC5MM-IR

  Focal length 16.0 mm, Sensor: 2/3″, C-mount

• LM25JC5MM-IR

  Focal length 25.0 mm, Sensor: 2/3″, C-mount

• LM35JC5MM-IR

  Focal length 35.0 mm, Sensor: 2/3″, C-mount

The NCM model offers super high resolution and utilizes the floating mechanism system. The wide angle 3.5mm lens with the extra low distortion design will pave the way for new possibilities in the machine vision.

• LM3NCM

  Focal length 3.5 mm, Sensor: 1/1.8″, C-mount

• LM4NCM

  Focal length 4.4 mm, Sensor: 1/1.8″, c-mount

• LM6NCM

  Focal length 6.0 mm, Sensor: 1/2″, C-mount

This series of megapixel lenses offers very high resolution (120lp/mm). The special NF-mount allows to design a very compact high-end megapixel lenses for demanding application with a wide field of view. These lenses are used for various broadcast projects with limitation on dimensions for the camera systems.

• LM3NF

  Focal length 2.7 mm, Sensor: 1/3″, NF-mount

• LM5NF

  Focal length 4.5 mm, Sensor: 1/3″, NF-mount

• LM9NF

  Focal length 9.0 mm, Sensor: 1/3″, NF-mount

Matching up with the ever-increasing requirements of the customers, our company offers Kowa. This Kowa is extensively used in different other sectors. Our product range is known for its compact design and fewer maintenances. Our offered ranges of products are resistant to manufacturing defects and are designed as per the convenience of the user. They are highly appreciated by our clients for their superior performance.

Features: 

• Affordable Prices
• Robust Construction
• Easy to use

Kowa offers a wide range of high-resolution zoom lenses with 10x to 50x zoom. The focal length varies from 5,5mm up to 1.000mm pure optical zoom without the disadvantage of using any extenders. That´s why Kowa high-resolution zoom lenses deliver crops and sharp images from the centre to the corner even under critical light conditions.

LMZ300AMP

• Focal length 5.5 - 165.0 mm, Sensor: 1/3″, CS-mount

LMZ300AMPDC

• Focal length 5.5 - 165.0 mm, Sensor: 1/3″, CS-mount

LMZ200AMPDC

• Focal length 5.6 - 112.0 mm, Sensor: 1/3″, CS-mount

LMZ111AMPDC

• Focal length 6.0 - 60.0 mm, Sensor: 1/3″, CS-mount

LMZ110AMPDC

• Focal length 6.0 - 90.0 mm, Sensor: 1/3″, CS-mount

LMZ7527AMPDC

• Focal length 7.5 - 127.0 mm, Sensor: 1/2″, C-mount

LMZ0824AMPDC

• Focal length 8.0 - 240.0 mm, Sensor: 1/1.8″, C-mount

LMZ0812M3P-IR

• Focal length 8.0 - 120.0 mm, Sensor: 1/2″, C-mount

LMZ0812AMPDC-IR

• Focal length 8.0 - 120.0 mm, Sensor: 1/2″, C-mount

LMZ112AMP

• Focal length 11.0 - 200.0 mm, Sensor: 1/2″, C-mount

LMZ112AMPDC

• Focal length 11.0 - 200.0 mm, Sensor: 1/2″, C-mount

LMZ1177M3P-IR

• Focal length 11.0 - 77.0 mm, Sensor: 2/3″, C-mount

LMZ1177AMPDC-IR

• Focal length 11.0 - 77.0 mm, Sensor: 2/3″, C-mount

LMZ1177M3P-SW

• Focal length 11.0 - 77.0 mm, Sensor: 2/3″, C-mount

LMZ123AMP

• Focal length 12.0 - 300.0 mm, Sensor: 1/2″, C-mount

LMZ123AMPDC

• Focal length 12.0 - 300.0 mm, Sensor: 1/2″, C-mount

LMZ1236AMPDC-XF

• Focal length 12.0 - 360.0 mm, Sensor: 1/1.8″, C-mount

LMZ375AMP-XF

• Focal length 15.0 - 375.0 mm, Sensor: 1/2″, C-mount

LMZ375AMPDC-XF

• Focal length 15.0 - 375.0 mm, Sensor: 1/2″, C-mount

LMZ16160M3P-IR

• Focal length 16.0 - 160.0 mm, Sensor: 1″, C-mount

LMZ16160AMPDC-IR

• Focal length 16.0 - 160.0 mm, Sensor: 1″, C-mount

LMZ16160M3P-SW

• Focal length 16.0 - 160.0 mm, Sensor: 1″, C-mount

LMZ20750AMPDC-XF

• Focal length 20.0 - 750.0 mm, Sensor: 1/1.8″, C-mount

LMZ1000AMPDC-XF

• Focal length 20.0 - 1000.0 mm, Sensor: 1/2″, C-mount

LMZ20750AMPDC-SW

• Focal length 20.0 - 750.0 mm, Sensor: 1/1.8″, C-mount

LMZ20550AMPDC-IR

• Focal length 20.0 - 550.0 mm, Sensor: 1/1.8″, C-mount

LMZ25300AMPDC-IR

• Focal length 25.0 - 300.0 mm, Sensor: 1″, C-mount

LMZ25300AMPDC-SW

• Focal length 25.0 - 300.0 mm, Sensor: 1″, C-mount

LMZ750AMP-XF

• Focal length 30.0 - 750.0 mm, Sensor: 1/2″, C-mount

LMZ750AMPDC-XF

• Focal length 30.0 - 750.0 mm, Sensor: 1/2″, C-mount

Hole inspection optics have been developed to enable the perfect viewing of holed objects, cavities and containers.
Unlike common optics or so called "pinhole lenses" which can only image flat fields of view, Hole Inspection Optics are specifically designed to image both the bottom of a hole and its vertical walls.
Thanks to the large view angle (>82° degree) and innovative optical design, these lenses are compatible with a wide range of object diameters and thicknesses. Hole Inspection Optics are therefore the solution of choice to inspect a variety of different object shapes such as cylinders, cones, holes, bottles or threaded objects.