Menzel Vision And Robotics Private Limited

The 32C series enclosure was developed for cameras of up to 50mm x 50mm. It will also accommodate lenses up to 74mm in diameter. It is especially useful for robot applications, and is small & light enough to be mounted on the arm or end effector. The enclosure provides tool-less access to the camera & lens, and is available with either a standard PG29 drillable cord grip, or a bulkhead cable fitting for quick disconnect.

Other options include glass or polycarbonate windows, air cooling, and an air curtain option that blows a film of air over the outside of the viewing window. This is effective in keeping dust, water, and oil mist off the window. The enclosure comes standard with a clear hardcore anodized finish, and can be supplied in a variety of colors and finishes. A Pan & Tilt base option is also available.

Product Features

• 6061 aluminum construction
• Lightweight design
• Designed for robotic applications
• Tool-less access to camera
• Polycarbonate viewport
• Longer barrels available to support longer lenses
• Optional Hirose bulkhead fitting (for quick disconnect) or drillable cord grip (for use with premade cables)
• Air cooling/air curtain option available
• Can be purchased in a variety of colors and finishes

Note: The construction of this enclosure does not meet standards for food applications.

• Enclosure is constructed of 6061 aluminum (body, barrel & faceplate) and 304 stainless steel (rear bulkhead).
• Window is glass or polycarbonate. All supplied fasteners are 18-8 stainless steel.
• Fasteners to mount your camera are included.
• Interior size with the standard barrel is: 2.9" (74 mm) dia. by 7.5" (190 mm) in length.
• Weight: 50 oz with standard barrel & Hirose bulkhead connector, 46 oz with PG16 cord grip

The 22C series enclosure was developed specifically for today's 30mm x 30mm cross-section miniature inline cameras. It will also accommodate lenses up to 48mm in diameter. It is especially useful for robot applications and is small & light enough to be mounted on the arm or end effector. The enclosure provides tool-less access to the camera & lens and is available with either a standard PG16 drillable cord grip or a bulkhead cable fitting for quick disconnect.

Other options include glass or acrylic windows, air cooling, and an air curtain option that blows a film of air over the outside of the viewing window. This is effective in keeping dust, water, and oil mist off the window.

The enclosure comes standard with a clear hardcore anodized finish and can be supplied in a variety of colours and finishes.

A Pan & Tilt base option is also available.

Note: The construction of this enclosure does not meet standards for food applications.

• An enclosure is constructed of 6061 aluminium (body, barrel & faceplate) and 304 stainless steel (rear bulkhead).
• A window is a glass or acrylic. All supplied fasteners are 18-8 stainless steel.
• Fasteners to mount your camera are included.

Interior size with the standard barrel is 1.9" (48 mm) dia. by 6.4" (162 mm) in length.

Weight: 19.7 oz with standard barrel & Hirose bulkhead connector, 19.2 oz with PG16 cord grip

Optional Pan and Tilt mount are also available.

• 6061 aluminium construction
• Lightweight design
• Designed for robotic applications
• Tool-less access to camera
• Glass or acrylic viewport
• Longer barrels available to support longer lenses
• Optional Hirose bulkhead fitting (for quick disconnect) or drillable cord grip (for use with premade cables)
• Air cooling/air curtain option available
• Can be purchased in a variety of colours and finishes

Harsh Environment
Dust, Dirt, Splashed Water, Oil Mist

Product Features:

• Built to provide basic protection
• Supports Cognex DataMan 500 and Cognex DataMan 300 cameras
• Meets NEMA 12 standards
• 304 stainless steel construction
• Camera to Viewport distance can be changed to handle long or wide angle lenses
• Comes standard with glass or acrylic viewport
• Works with pre-made cables

The 42D enclosure is a lower cost stainless steel & aluminum housing for your Cognex DataMan 500 or Cognex DataMan 300 camera. It is designed to protect your camera from impacts, dust, dirt, splashed water and idle hands.

The enclosure is highly configurable, with air cooling and air curtain faceplate options.

The standard cable gland at the bottom of the enclosure uses a split insert to provide a watertight seal around one or more cables. The gland allows passage of one or more premade cables without removal of the connectors from the cables.

The enclosure is designed so that once the enclosure cover is removed, the user has full access to the camera & lens, taking the guesswork out of changing focus and f-stop settings.

The standard 42D enclosure allows the lens to be adjusted close to the viewport to reduce reflections.

• Enclosure cover is constructed of 16 gauge 304 stainless steel, Enclosure Base is constructed of 1/4" 6061 aluminum.
• All external fasteners are 18-8 stainless steel.
• Fasteners to mount both the Cognex DataMan 500 and Cognex DataMan 300 cameras are included.

Enclosure meets NEMA 12 standards when equipped with the sealed viewport.Cord grip options include Drillable PG36 37mm cord grip, 1/4" NPT connectors for air cooling and pressure regulation. The enclosure also is available with an air curtain faceplate. Call APG for options.

Weight: 3.14 lb.

Optional Pan and Tilt mount are also available.

Product Features

• 6061 aluminium construction
• Lightweight design
• Designed for robotic applications
• Tool-less access to camera
• Glass or acrylic viewport
• Multiple barrels lengths available
• Air cooling/air curtain option included

The 24C series enclosure handles up to a 44mm x 30mm cross-section inline camera. It will also accommodate ring lights up to 55mm in diameter. It is especially useful for robot applications and is small & light enough to be mounted on the arm or end effector. The enclosure provides tool-less access to the camera & lens and comes standard with a PG21 drillable cord grip.

Other options include glass or acrylic windows, air cooling, and an air curtain option that blows a film of air over the outside of the viewing window. This is effective in keeping dust, water, and oil mist off the window.The enclosure comes standard with a clear hard coat anodized finish and can be supplied in a variety of colours and finishes.

Note: The construction of this enclosure does not meet standards for food applications.

• An enclosure is constructed of 6061 aluminium (body, barrel & faceplate).
• The window is glass or acrylic. All supplied fasteners are 18-8 stainless steel. Fasteners to mount your camera are included.
• Interior size with standard 6.4" barrel is: 2.25" (57 mm) dia. by 7.25" (184 mm) in length.
• Weight: 19 oz with standard barrel & PG21 cord grip.
• Optional Pan & Tilt mount is also available.

Product Features

• Constructed for highly corrosive environments
• 100% type 316 stainless steel construction
• 3 axis (pan, tilt, roll) mounting
• Works with many cameras and vision systems
• Meets IP65 standards (with std faceplate)
• FDA grade gaskets & O-rings
• Easy sensor mounting, aiming and lens adjustment
• Works with pre-made cables

The 35C food grade enclosure is intended for over-the-line FDA applications. It is 100% 316 stainless steel construction and care has been taken to reduce moisture traps.

The 35C enclosure is designed to make mounting, aiming and servicing your camera as simple as possible. The cable gland on the back allows you to use most pre-made cables without disassembly and provides a water-tight seal around one or more cables.

The enclosure includes a stainless steel mount providing pan and tilt. The enclosure design also provides roll axis adjustment, allowing precise aiming of the camera. All aiming adjustments can be made after the camera is mounted, taking the guesswork out of focus and f-stop settings.

The 35C enclosure is available in a variety of standard barrel lengths from 4" to 13". Barrel extensions and custom barrel lengths also are available.

Optional accessories include air cooling and anti-reflective coatings for the polycarbonate window. Other window materials are also available.

• 100% type 316 stainless steel construction.
• Backplate has (2) ¼" NPT holes for optional air cooling, and a PG36 split insert cable gland.
• All fasteners are 316 stainless steel.
• Fasteners to mount your camera are included.
• Standard polycarbonate window.

Interior size: 3.2" diameter, 8.5" length in 9" barrel. Barrel length can be specified

Weight: 8.8 lbs. (with glass viewport and 9" barrel)

Product Features

• Compliance with NEC Class I, Div 1 & 2 Groups B, C & D, Class II, Div 1 & 2 Groups E, F & G, Class III
• UL Classified
• CSA Certified - Standard C2/C32.2, No. 30-M1984
• Cenelec approval
• NEMA 3, 4X, 7 & 9
• Cast aluminium construction
• Two 3/4" NPT fittings for cable conduit

The C2/C3 explosion-proof enclosure offers compliance with NEC Class I, Groups B, C and D and Class II, Groups E, F and G. These Classifications and Groups are covered in Article 500 of the National Electrical Code.

The enclosure is also NEMA 4X rated, allowing use in a salt water washdown environment.

The C2 Series is designed for small inline cameras like the Keyence CV020, Cognex CDC2/C300, Sony XC Series, and the Basler 601 series. The C3 Series will accommodate larger diameter cameras and ring lights.

The C2/C3 enclosure includes two 3/4" NPT tapped holes for conduit attachment. Additional conduit entry can be added if factory instructions are followed.

The overall weight of the enclosures are approximate:

• C2-5.75 lbs.
• C3-6.7lbs

C2 Dimensions

• An enclosure is constructed of copper free aluminum for maximum saltwater corrosion protection.
• Camera arm and fasteners to mount your camera are included.
• Inside Diameter: C2-3.5" C3-4.0"
• Inside Depth: C2-6.3" C3-6.5"
• Viweport Diameter: C2-2.6" C3-3.0"
• Enclosure meets NEMA 4X standards.
• Enclosure is tapped for 3/4" NPT conduit.
• Weight: 5.75 lb.

Product Features

• Meets NEMA 4X standards
• 316 Stainless Steel construction
• Polycarbonate Viewport
• Single point Pan & Tilt mount
• Built for highly corrosive locations
• Highly impact resistant
• Designed for food environments
• Comes in a multitude of sizes

The AV Series lighting enclosure is a 316 stainless steel housing with an abrasion resistant polycarbonate face allowing a large area of illumination. Designed for FDA food applications care has been taken to eliminate places where moisture may accumulate.

The unit comes with a single point mount which also provides a pan & tilt feature for easy installation and aiming. The 16 gauge body also provides excellent impact resistance giving you a lighting fixture that can withstand the rigors of an extreme industrial environment.

• The lightning enclosure is constructed of 16 gauge type 316 stainless steel.
• All fasteners and washers are 316 stainless steel.
• Fasteners to mount your light are included.
• The viewport is polycarbonate.
• Weight: 2.5lbs. (AV-DA with viewport)

Product Features

• 3 axis (pan, tilt, roll) adjustment built into the enclosure
• Works with many larger cameras and sensors
• Meets IP65 standards (with std faceplate)
• Hardcoat anodized aluminum construction
• Tool-less access to camera for adjustments
• Works with pre-made cables

The 47C replaces the 45C. It has similar dimensions but has been reworked to improve fit and finish.

The 47C enclosure is designed to make mounting, aiming and servicing your camera as simple as possible. The cable gland on the back allows you to use most pre-made cables without disassembly and provides a water-tight seal around one or more cables.

The enclosure includes a stainless steel mount providing pan and tilt. The enclosure design also provides roll axis adjustment, allowing precise aiming of the camera. All aiming adjustments can be made after the camera is mounted and aimed, taking the guesswork out of focus and f-stop settings.

The 47C enclosure can handle a variety of larger body cameras, cameras with larger lenses, and cameras with relights. The enclosure is available in a variety of standard barrel lengths from 6" to 13". Custom barrel lengths also are available.

Optional accessories include an air curtain faceplate and fittings (a press-in air hose connector and a pressure relief valve) to allow air purging and cooling, heat-absorbent glass for looking at hot objects and polycarbonate or acrylic windows for specialized applications.

• An enclosure is hard coat anodized 6061 aluminium with stainless steel mounting foot.
• The enclosure has (2) ¼" NPT holes for optional air cooling, and a PG36 split inserts cable gland.
• All fasteners are 18-8 stainless steel.
• Fasteners to mount your camera are included.
• Interior size: 4.2" diameter, 12.4" length with 13" barrel, barrel length can be specified
• Weight: 11.2 lb. (with glass viewport and 13" barrel)