Special Lens

The tccage is an integrated opto-mechanical system designed to fully inspect and measure parts from their side without any need of rotation.
Four orthonormal views of an object are provided by a telecentric lens through an array of mirrors. The optical path is designed so that the displacement angle between the views is exactly 90°; this optical layout ensures complete coverage of the object lateral surface. Furthermore, telecentric imaging makes the system insensitive to part decentering and therefore suitable for measurement applications.
the tccage is the perfect solution for inspecting parts whose features would be hidden when looked at from the top and for all those applications where an object must be inspected or measured from different sides.
two different illumination devices are built into the device to provide either backlight or direct part illumination.

OE Poly View Lenses provide 8 different views of the side and top surfaces of an object.
A wide perspective angle (45°) makes these components suitable for the inspection of the side features of an object (i.e. the threads of a screw or a nut) otherwise impossible to image with a single camera.
Both the external walls of an object and its top can be imaged at once.
Internal surfaces of holed objects can be completely inspected from the outside.
Imaging the inner walls and the bottom of a cavity is also possible, as well as achieving a combined view of the internal and external surfaces of an object.
In addition to these unique features, PolyView Optics also grant a very high image resolution and very good image brightness.

Boroscopic probes are used to inspect holed objects such as engine parts, containers and tubes whose hidden features can only be controlled by introducing a probe into the cavity.
the catadioptric (refracting + reflecting) optical design ensures much higher resolution than fiberbased probes and enables a complete 360° inner view throughout the entire cavity length.
boroscopic probes are intended to be handled by a robot arm or S. C. A. R. A. in order to scan even the deepest cavities.
built-in illumination keeps the device very compact and makes it suitable for simple 3d profile and diameter measurements by means of panoramic triangulation techniques.

Hole inspection optics have been developed  to enable the perfect viewing of holed objects, cavities and containers.
Unlike common optics or so called "pinhole lenses" which can only image flat fields of view, Hole Inspection Optics are specifically designed to image both the bottom of a hole and its vertical walls.
Thanks to the large view angle (>82° degree) and innovative optical design, these lenses are compatible with a wide range of object diameters and thicknesses. Hole Inspection Optics are therefore the solution of choice to inspect a variety of different object shapes such as cylinders, cones, holes, bottles or threaded objects.

PERICENTRIC LENSES are an exclusive product developed to enable 3D peripheral vision of objects without the aid of mirrors.

By means of this unique optical design, just one camera shot is enough to capture the top and side views of an object.

The name “pericentric” is because of the specific path of the light rays: the aperture pupil is seen from object space as if it was moving around the peripheral zone of the front optical group.