Microscope Services

Inverted Metallographic workstation with fully Imported Optics.(Ideal for Image Analysis)

Microscope Stand: Sturdy , well contured and practical inverted and ergonomically designed.

Viewing Head: Binocular observation head conveniently inclined at 45⁰ off the horizontal, with coated prisms and interpupillary & dioptic adjustment. Trinocular port for CCD or 35mm Camera.

Focusing:  Co-Axial focusing module with slides traveling on ball bearing guide ways. Large graduated mechanical stage with low drive co –axial controls for X-Y movement on the ball slides.  

Nosepiece: Quadruple revolving nosepiece for quick magnification change, with positive click stop for proper centering.

Objectives: Special flat field , glare free high contrast parafocal PLAN objectives M10x,M20x,M40x & 100x(oil).

Eyepieces: Compensating High Eye point widefield Eyepieces HKW 10x(Field No.18).

Magnification:100x-1000x for visual observation, 50x-1600x digital on monitor.

C Mount:Built-in C mount to interface CCD Camera.

Illumination: A special 6v/50w halogen illuminator powered by Switch Mode Power Supply(SMPS) to ensure constant output voltage ideally required for microphotography.

Accessories: Grain size eyepiece,filial eyepiece,100X dry plan objective, CCD camera, Image Analysis System, Polarising attachment.  

Microscope Stand: Rigid & Stable stand with well contured modular large base. Ball bearing guide ways and slides provide extra smooth movement.

Viewing Head: Binocular interchangeable with Trinocular head for microphotography and CCTV projection system with dioptric and interpupillary adjustment.

 Focusing: Co-Axial Coarse and Fine Focusing Module.

 Stage: Large size Stage with coaxial load drive, for convenient viewing of Specimens.

 Illumination: Incident Light through Epi-Illuminator with Field aperture Diaphragm and filters slot. Continuously Variable Luminosity control Through Built in Electronic Transformer.     

 Plan objective: High Fidelity Flat field plan objective M5x, M10x , M40x & M100x oil.

 Eye Pieces: Compensation wide Field 10x & 15x paired

 Magnification: 50x to 1500x.

 Accessories: Image Analysis System, CCTV projection System, Micro Meter Eyepieces, Filiar Micro Meter Eye Pieces, Grain Size Eye Pieces, Stage Micro Meter.100x dry plan Objective, Polarizing, Dark Field attachment.        

These are just a few of the many applications that use Image-Pro Plus software to analyze images.

Aerospace

Automotive Manufacturing

Ceramics

Coatings and Corrosion

Concrete and Aggregate Analysis

Cosmetics

Failure Analysis

Geology

Metallurgy

Material Science

Mineralogy

Pharmaceutical Development

Polymers

Quality Control and Assurance

Semiconductors

Solar Cell Quality Control

Surface Characterization

Textile / Fiber

Wires and Connectors

Menzel Polarized Microscope Recommended For Chemistry & Pharmaceuticals.

Features: Large, stable microscope base and limb with graduated, coaxial coarse and fine focusing, rack and pinion focusing condenser mount, Koehler base illuminator with pre-centered 30watt tungsten halogen source and with integral 115 volt electronic transformer with intensity control.

• Binocular or Trinocular body, 30⁰ inclinations, with high transmission prism system. Attachment fitting slotted for correct orientation. Dovetail slider inter-ocular adjustment and dioptric compensation facility incorporated in one eye tube. One eye tube slotted for 99⁰ and 45⁰ orientation of cross-line eyepiece.
• Both orthoscopic and conoscopic systems of observation can be carried out.
• Extra-bright, extra-large interference figures are produced by a new concept Bertrand lens.
• Ball-Bearing rotating stage, 150mm diameter, graduated with vernier and stage specimen clips.
• Ball-Bearing quadruple nosepiece with one fixed and three centerable PLAN objective apertures.
• Analyzer, in slide E-W insertion.
• Bertrand lens with field-limiting stop, in slide for E-W Insertions.
• Polarizers, in swing-out click/clamp mount, fully rotate able with click stop at 0⁰ and 90⁰.
• Slide opening in limb for insertion of DIN standard 20mm x 6mm compensators, slide way SE-NW.
• Strain free Achromatic Condenser, N.A.1.25, with aperture iris diaphragm and swing-out filter holder.
• Eyepiece HWF 10X with cross line.
• PLAN Objectives DIN SM Plan Strain Free 4X, 10X, 40X.
• Illuminator Koehler type halogen 12v/50w.
• Accessories CCD Camera, Image Analysis System.

Menzel R&D Precision Measuring Microscope System

For Measurement of Fine line tracks with 1-micron accuracy
Standard Specification:

Viewing Head        : Erect Image Binocular head, Erect image Trinocular head.

Eyepieces              : Pairs 10XWF.

PLAN Objectives : PLAN Objectives M5X, N. A. 0.10,
PLAN Objectives M10X, N. A.0.25,                               PLAN Objectives M20X, N. A.0.40, PLAN Objectives M40X, N. A.0.65.

Illumination        : Tungsten Halogen illuminations with variable controls.
A)      Diascopic illumination (Base) with Halogen illumination.
B)      Incident illumination Halogen/Fluorescent for surface studies.

Focusing                  : By coarse & fine adjustment.

Stage travel             : 25mm in both X & Y direction.

Stage                        : 150mm X 150mm with X&Y movement by micrometers.

Accuracy                  : Accuracy 0.01/0.001mm

Optional                  : Image Acquisition, Analysis,
Measurement and Reporting Software. Digital Micrometer with 0.001mm accuracy.

Menzel Trinocular Stereo Zoom Microscope

Mainly recommended for advanced studies in Biology,Metallurgy,Mineralogy,electronics & watch Industry.Zoom focusing with magnification from 10X to 50X extendable to 150X with additional PLAN objective lenses.Trinocular Photomicroscopic observation tube interchangeable to binocular body by change to lever system.Built in sharp halogen illumination system controlled by solid state variable control system.

Accessories for Stereo Zoom Microscope

SWF 20X eyepiece pair,Auxiliary PLAN objective 2X,
CCD Camera.Image Analysis,Polarising, dark field, gem inspection attachment.