Menzel Vision And Robotics Private Limited

An increasing number of applications make use of the ultraviolet (UV) portion of the spectrum. UV wavelengths let surface artifacts appear in greater clarity, and allow visualization of smaller features than those which can be seen using visible light.

JAI can provide you with a UV inspection camera with a resolution from 0.4 to 1.4 megapixels, and with analog, Camera Link, or GigE Vision interfaces. Consult the table below for the current list of cameras with UV options. Note: not all UV models are available in all sales regions.

Model Overview:

For nearly 20 years, governmental agencies, roadway operators, system integrators and others looking for the best possible results from intelligent transportation systems have turned to JAI for their vehicle imaging solutions. That's because JAI's innovative hardware and software technology has been proven to deliver better image quality and more advanced vehicle identification capabilities than any other solutions provider.

Our cameras, subsystems and advanced software packages serve system integrator partners who use JAI technologies in large-scale ITS projects including electronic toll collection (ETC), open road tolling (ORT), multi-lane free flow tolling, congestion charging, travel time information and parking enforcement. JAI’s vehicle identification systems are also ideal for supplying evidence of traffic violations in applications such as bus lane enforcement, speed enforcement, and red light enforcement.

JAI's traffic products include:

VISCAM 1000 - The VISCAM 1000 delivers advanced imaging capabilities in a high-performance package designed for advanced integration with lane controllers, back office systems, and JAI-supplied or third-party software products.

Drive5 – Combining performance with value, Drive5 is a self-contained imaging system providing outstanding image quality in a form factor that’s small, rugged, and affordable.

LED Flash Products – JAI’s LED flash systems to provide high power external illumination, including both visible and non-visible solutions, to complement any vehicle imaging setup.

Software Products - The JAI Vehicle Recognition Suite (VRS) includes capabilities for ALPR/ANPR (plate reading), graphical plate/vehicle matching, and the aggregation and transfer of image files and associated meta data from camera locations to back office systems.

• Food inspection and sorting (meat, fruit, nuts, vegetables + more)
• Print inspection
• Tile inspection
• Inspection of textile rolls
• Entertainment (Sports - finish line and film scanning)
• PCB inspection
• Wood inspection
• Granules inspection
• Raw cotton and mineral inspection

• Aerial imaging (for example security and vegetation analysis)

JAI combines its advanced prism technology with multiple CCD or CMOS linear sensors to deliver high performance color line scan solutions for high-speed web/continuous applications such as print verification, tile inspection, food/fruit sorting, and more.

Shown below are some of the most common accessories ordered with JAI cameras. Click on a link for more details about a particular accessory.

MP-40
Tripod adapter plate

MP-41
Tripod adapter plate

MP-42
Tripod adapter plate
- For Spark & Elite Series

MP-43
Tripod adapter plate
- For Go Series

TP-50 Tripod mounting plate

TP-30 Tripod mounting plate

TP-20 Tripod mounting plate

C3 Compact - Right Angle Adapter

MP-50 - Right angle adapter

MP-70
Right angle adapter

MP-80
Right angle adapter

MP-90
Right angle adapter

PC-12P
Hirose 12-pin connector

PC-6P
Hirose 6-pin connector

IR-cut filter

5 mm extension ring

MP-20
C-mount adapter

MP-30
Mounting bracket

PD-12 Power supply

12P-02S Power cable

PD-6 Power supply

6P-02S Power cable

15P-02-9P-AG AG-7000 interface/power cable

15P-02-9P-FULL TM-77X / RM-67X interface/power cable

15P-02-9P TM-77X / RM-67X simple interface/power cable

26CL-02-26 2 meter Camera Link cable

26PMCL-02-26 Mini-CL / Power over Mini-CL cable

VA-033 adapter

Main benefits of the Fusion series:

• Two-in-one camera
  Multi-spectral imaging technology allows users to replace multiple inspection stations with a single set up.
• Ease-of-use
  JAI multi-spectral cameras offer ease-of use and lower equipment and maintenance costs.
• Exceptionally good HDR images
  The dual-sensor HDR design enables the capture of full linear high dynamic range image data without the image compression and noise found in typical single sensor HDR cameras.
  The two image channels in the HDR camera can be analyzed separately or processed with image fusion algorithms to produce a dynamic range nearly double the normal CCD response.

Fusion series cameras are ideal for application like:

• Inspection of organic items such as fruit and vegetables.
• Inspecting of currency and checks.
• Textile and plastic inspection.
• Circuit board inspection.
• High-end security surveillance.
• LED inspection, welding, glass inspection and solar panel manufacturing.
• Monitoring of industrial furnaces or heated metal.
• Traffic applications

The new Sweep SW-2000M-CL-80 camera is based on a 2048-pixel linear high speed CMOS sensor available exclusively from JAI. The SW-2000M is the only line scan camera on the market at the moment offering large 20 µm x 20 µm pixels for exceptional light gathering ability, dynamic range and signal-to-noise ratios.

It runs at an 80 kHz line rate for a unique combination of speed and pixel size for a range of industrial vision applications. Interface options include Camera Link or CoaXpress.

When even higher performance is required, the new SW-4000M-PMCL and SW-8000M-PMCL are among the fastest monochrome line scan cameras in the industry.

The SW-4000M-PMCL features 4096 pixels per line and is capable of running at up to 200,000 lines per second. In addition, the SW-4000M-PMCL let users select between a large well mode for maximum image quality when illumination is plentiful, or a small well mode for faster responsivity when lighting is limited or when the shortest possible shutter speeds are required.

• Electronics component inspection
• Wafer inspection
• Raw material inspection (e.g. wood, food, minerals etc.)
• Sports imaging (finish line)
• Print inspection
• Waste management
• Web applications (paper, plastic etc.)

The GO-5000M-PGE is a compact industrial area scan camera delivering an excellent blend of size, versatility, and performance, all at an entry-level price. It delivers 5-megapixel monochrome output at up to 22 fps, with flexible ROI and binning capabilities that enable the camera to be tailored to a wide range of machine vision applications.

The GO-2400C-PGE is a compact industrial area scan camera delivering an excellent blend of size, versatility, and performance, all at an entry-level price. It delivers 2.35-megapixel raw Bayer color output at up to 48 fps while offering exceptional low-noise image quality for a wide range of machine vision applications.